Essa Products
Products > Sample Preparation
JC3000 JAW CRUSHER
A general purpose, low maintenance jaw crusher suitable for laboratory and plant use. The JC3000 is a rugged high reduction jaw crusher that can be configured to suit a range of applications.
- Reduced capital cost: flexibility of use allows for continuous or batch use in laboratory, field and plant applications.
|
- Flexibility of installation: available in upright standalone or low profile configuration.
|
- Large core and lump crushing: 300mm x 200mm jaw opening accepts large input feed size up to 170mm, suitable for most drill core sample sizes.
|
- Increased productivity: high reduction ratio, with 25mm product size, provides faster and more efficient crushing with reduced process stages.
|
- High throughput: rapid and powerful crushing at 3 tonnes per hour throughput.
|
- Increased availability: designed with a mechanically simple single toggle that is reliable and easy to maintain and repair.
|
- Ergonomically designed: fitted with feed hopper and easily accessible aluminium sample drawer
|
- Enhanced operator health: two dust extraction points remove airborne dust at the feed hopper and sample drawer improving the operating environment and reducing sample contamination.
|
- Improved quality: easy and fast jaw gap adjustment provides good control of product sizing while minimising maintenance downtime.
|
- Ready to go: fitted with control box featuring simple stop/start button and motor protection.
|
- Reduced operating/spares cost: extended wear part life with reversible and interchangeable jaw plates.
|
- Improved quality: jaw plates made from hard wearing chrome steel further reducing sample contamination.
|
- Decreased downtime and maintenance costs: long life roller bearings exhibit reliability at high load capacity
|
- Improved safety: full drive guarding enhances personal safety and complies with client OH&S standards.
|
- High level motor protection: IP65 rated electric motor is totally protected against dust ingress and against low pressure water jets from any direction.
|
| Jaw Inlet |
300 mm x 200 mm |
|
| Maximum Feed Size |
170 mm (85% of jaw inlet) |
|
| Usual Product Size |
25 mm |
|
| Maximum Product Size |
50 mm |
|
| Throughput at Usual Product Size |
3,000 kg/h |
|
| Motor Power |
7.5 kW, 3 phase |
|
| Toggle Speed |
350 strokes per minute |
|
| Dynamic Loading - Vertical |
|
|
| Dynamic Loading - Horizontal |
|
|
| Dynamic Frequency |
|
|
| Dust Extraction Points |
Two |
|
| Dust Extraction Flow |
270 L/s |
|
| Mass |
1,100 kg |
|
| Dimensions (length x width x height) |
1,000 mm x 790 mm x 1420 mm |
|
Please note that the figures quoted above are nominal only performance expectations that can vary according to the physical characterisics of the material being prepared, the condition of the equipment, the gap adjustment and the method of feeding the crusher.
|